Home > Products > Fibre Optical Cables > Metal Free Optic Fibre Cable (DUCT)
- 1. Fibre Reinforced Plastic as dielectric central strength member.
- 2. Six Poly Butylene Terephthalate (PBT) loose tubes stranded around the central strength member to form the cable core.
- 3. Optic Fibre are housed in loose tube.
- 4. Thixotropic jelly injected in loose tube with Fibre.
- 5. Interstices within the cable core flooded with jelly.
- 6. Polyester tape is wrapped around the cable core.
- 7. High-density polyethylene sheath.
- 8. Anti-termite Nylon-12 jacket extruded over HDPE sheath.
Applications
|
Technical Specifications From 6F to 48F Cable | ||||||||||||||||||||||||||||||||||||
Description | Typical Values | |||||||||||||||||||||||||||||||||||
Single Mode Optic Fibre | Complying to ITU G. 652 | |||||||||||||||||||||||||||||||||||
Fibre Colour Code | Blue, Orange, Green, Brown, Slate/ Grey, White, Red, Black, Yellow, Violet, Rose / Pink, Natural / Aqua | |||||||||||||||||||||||||||||||||||
Buffer Loose Tube Colours(Optional) | Blue, Orange, Green, Brown,Slate/ Grey, White, Red, Black, Yellow, Violet, Rose / Pink, Natural / Aqua | |||||||||||||||||||||||||||||||||||
Optical Performance | Attenuation @ 1310nm, ≤ 0.38dB / km, Attenuation @ 1550nm, ≤ 0.25dB / km | |||||||||||||||||||||||||||||||||||
Mechanical Performance | Tensile Strength | Min Bend Radius | Impact | Torsion | ||||||||||||||||||||||||||||||||
1W | 1.3W | 2.5W | 20D | 50N | 100N | |||||||||||||||||||||||||||||||
Enviornmental Performance | Temperature | Operating | Installation | Storage / Shipping | ||||||||||||||||||||||||||||||||
Specification | -20°C to + 70° C | -20°C to + 70° C | -30°C to + 70° C | |||||||||||||||||||||||||||||||||
Physical |
|
|||||||||||||||||||||||||||||||||||
Testing & Inspection |
|