Inquiry
Please Install Flash PlayerDownload from here
Ptfe Wire
Coaixal Ptfe Wire
Ptfe Equipment Cable

 

PTFE cables

Relemac Technologies has well-established itself over the last 20 years. We deal in a wide range of PTFE Cables that find application in several commercial as well as residential set ups. We opened in 1993 and we are now known worldwide as a provider of the highest quality cables as well as for our design and manufacturing ethos. We are one of the largest manufacturers of many different types of wiring and cabling, and that includes our entire PTFE wire line right from PTFE Cables, PTFE Wires, Multi Core Cables and to High Temperature Power Cables. Below you will see the sub categories.

» PTFE Equipment Wires
   (PTFE: Poly-Tetra-Flouro-Ethylene)
» PTFE Multi Core Cables

» Compensating & Extension

   (Thermocouple Cables)
» RF-Coaxial Cables
» PTFE Electrical Sleevings
» PTFE High Voltage Cables

    (Corona Resistant)
» PTFE Heaters Wires
» High Temperature Power Cables

» Relemac-Gold Ptfe Fire Safety Wires

» Cable Harness & Cable Assemblies

-----------------------------------------------------------------------------------------

PTFE Equipment Wires

Ptfe Equipment Cable
These insulated equipment / hookup wires are most often used inside of other electrical components. These wires are uniquely suited to this type of application. They possess outstanding build specs, which gives them very high mechanical & electrical properties. One of the most important of these is being very resistant to heat; they are approved for temperatures of over 180C, and down to -40C. In addition to temperature stability, PTFE cables are highly resistant to chemical fumes and liquids that would render other cables useless in a short time.

PTFE has outstanding dielectric properties which makes it ideal for the insulation of wires. These properties persist in high altitude environments as well. Relemac Technologies manufactures custom wires for internal hookups and equipment uses in stock sets but can also manufacture them custom made for your unique application in the following formats:

» Single core
» Multi Core
» Unscreened or screened sheathed
» Twisted Core
» Twisted Pairs and Twisted Triads types

MIL-W-16878E/BS2G-210/JSS-51034 are available in custom configurations, either stranded or bunched jacketed or unjacketed conductors with metal shielding.

----------------------------------------------------------------------------------- Topˆ

PTFE Multi Core Cables

Ptfe Mulricore Cable The manufacture of Multi Core cables which will be exposed to harsh environments is serious business, and Relemac Technologies takes the manufacture of their cables and wiring systems just as seriously. Our PTFE Multi Core cables meets the specifications of MIL-DTL-27500H /JSS 51038. This rating makes these cable ideal for use in the following applications:

» Instrumentation of power projects
» Chemical & fertilizers industries and support industries
» Steel plants
» Various other types of engineering industries

As well, these Multi Core cables are available in many different formats. Shielding prevents electrostatic interference which keeps external electric sources from corrupting the signal which is carried by the Multi Core cable. Obviously, this is of utmost importance for a cable which is used as in the control chain. Shielding also minimizes crosstalk and eliminates the signal transfer between circuits of the same cable. Below you will find the types of Multi Core cables most often used:

» Unshielded twisted cores
» PTFE Jacketed and Shielded twisted cores/ twisted pairs and
» Overall PTFE / PVC or Fiber Glass outer jacket cables


At short distances, twisted Multi Core or multi-pair unshielded cables can be used. These are most often used as a connecting link between the central instrumentation modules and the various transducers that they control.
----------------------------------------------------------------------------------- Topˆ

Compensating & Extension (Thermocouple Cables)

Thermocouple Cables

These cables are indispensable for measurements of precise temperatures at remote measurement points. The path from the thermocouple sensor to the measuring instrument is of utmost importance, especially in operations where precise temperature control is essential. The goal is to use similar metallic materials and thermoelectric properties as the thermocouple they are paired with. With both of these thermocouple cables they accomplish the same thing through different means. An extension cable is basically the same material (metal) as the thermocouple it is serving. Compensating cables are made of the proper amounts of cheaper alloys which when combined properly deliver the correct amount of mili-volts (e.m.f.) so that they are properly matched to the thermocouple. We can supply insulation and sheathing options to meet your specific needs, with some of the options listed below:
» PVC
» Asbestos
» Silicon
» Fibre-glass
» PTFE having a screen of Stainless steel
» Tinned plated
» Copper wire or silver plated copper wire


----------------------------------------------------------------------------------- Topˆ

RF-Coaxial Cables

RF-Coaxial Cables
High frequency speicifcations require the use of the best RF-Coax cables; Relemac Technologies is known for their outstanding cables in this area. RG cables meet or exceed American Military specifications standards MIL-C-17. These cables are made specifically for the transmission of signals in computer complexes as well as industrial electronics and maintenance applications, or any application where high frequency fidelity is needed. Our co-ax and triaxial PTFE cables have extremely high quality standards.


----------------------------------------------------------------------------------- Topˆ

PTFE Electrical Sleevings

PTFE Electrical Sleevings 
Our PTFE sleeving meets or exceeds the requirements set forth in Indian Defense Standards JSS 54802 (LCSO approved) and U.S. MIL-1-22129 protocols. This sleeving system can be used in electrical, electronic, chemical, mechanical and many other industries. The sleeves are made by a process of tape wrapping and sintering. It creates a very secure and stable wrap, and is available in the following colors and more, depending upon your need:

» Black
» Brown
» Red
» Orange
» Yellow
» Green
» Blue
» Violet
Colour combinations of some of the colors above

PTFE electrical Sleevings can withstand temperatures between negative 65 C and 260 C. They are also resistant to flame, hydraulic fluids, chemicals, aircraft and rocket fuel. This resistance is not affected by altitude.


----------------------------------------------------------------------------------- Topˆ

PTFE High Voltage Cables (Corona Resistant)

High Voltage Cables
Use this application where high voltage and high heat are combined;Screened & Jacketed from 5 KVAC to 22 KVAC (9 KVDC to 40 KVDC) working voltage in solid colours.Some standard sizes having specially formulated PTFE with Corona Resistant features, shows excellent results at high voltage.Additional Fiber glass outer Braiding also available.




----------------------------------------------------------------------------------- Topˆ

PTFE Heaters Wires

Heater
We are manufacturing PTFE Insulated Heating Wires. These heaters are Safe, Efficient and Long Life. These heating wires are being used in the following applications.

» Under Floor / Tile Heating.
» Flexible car seats heaters, carpet or blanket heating, Heating Mats.
» Temperature control for electronics display devices, obstruction/shadow-free, by using high strength fine conductor and thin wall insulation.
» Zone temperature control of distillation columns and heat tracer for pipes etc.

PTFE Insulated Heater wires find a large number of applications in process industries these are available in wire or coil form, for a fixed resistance value per meter. Various type of heating solutions for process heating upto 2000C can be designed with these heaters. Relemac make under floor heating cables are available in various wattage ratings, ranging from 150 Watts to 3000 Watts, with or without shield.These heating wires incorporate Alloy resistance wire capable of Long-life stability at the required temperature and are normally Multistrands PTFE Insulators over these resistance wires provide maximum insulation durability for long life and safe operation.

----------------------------------------------------------------------------------- Topˆ

High Temperature Power Cables

High Temperature Power Cables
These cables are designed to work with high current loads at high temperature environment conditions, such as wiring of furnace heaters, ovens and Industrial wiring under harsh working conditions. Conductors are made of fine multi-strand Bare/Silver Plated copper strands, PTFE insulated for 600 V / 1000 V working voltage grade, having suitable insulation thickness, which can bear the mechanical load of heavy  conductor, overall fiber glass braided & silicone varnished to provide surface protection to inner dielectric for extra mechanical stability. It can be further braid armored with stainless steel wire or tin plated copper wire.Relemac Wires & Cables manufacture both Single & Multi-core power cables.Basic Cores are insulated with PTFE for 600 V working grade laid up and PTFE Jacketed overall fiber glass braided with silicone varnish or stainless steel braided for mechanical protection, the However combination of both FG and SS can also be given.
----------------------------------------------------------------------------------- Topˆ

Relemac-Gold Ptfe Fire Safety Wires

Fire Safety Wires
Strands of pure electrolytic grade copper and PTFE wrapping and sintering make this the wire of choice for domestic and industrial electrical systems installations. These fire safety wires are designed for high priority/cost installations and installations where fire from electrical short circuits may cause damage to human life and property. The following commercial structures are ideal for fire safety wires:

» Hotels
» Restaurants
» Hospitals
» Computer rooms
» High rise buildings
» Cinemas
» Showrooms

These cables are manufactured with fine strands of pure electrolytic grade copper coated with PTFE wrapping & sintered, and they have an overall high heat resistant PVC coating, rated to 105C (HR PVC).



----------------------------------------------------------------------------------- Topˆ

Cable Harness & Cable Assemblies

Cable Assemblies
Premade cable harnesses and assemblies save a huge amount of time, and Relemac manufactures them from your specs with strict quality controls in place. When you order a harness or assembly from Relemac, you know it will fit. All specs are set to your technical needs, fitted with end connectors at the specified links with sealed Heat shrinkable sleeves. These ready-made harness and cabling assemblies can be installed easily, with no possibility of failure or mismatched components.


----------------------------------------------------------------------------------- Topˆ

Call / Email us today to discuss your specific PTFE cable & Wire needs.

 

 

cable price
Govt. Dept. Liaison
job in Delth career
Career job vaccience
Quality Policy
Packaging
Privacy
Disclaimer
Associated Link
www.relemacindia.com
www.relemaccables.net
www.relemacindia.net
www.skeswitchgears.com
 
Building Wire Exporters
Secured a order of ca ... Aug 27, 2010: Relemac has won its 4th continuously order from a Broadband Provid ... more.
one more step to succ ... Aug 12, 2010: Relemac has received its 3rd continuously order from a leading Bro ... more.
 
Control Cable Dealer
High Voltage Cable Manufacturers & Exporters of Hook Up Wire,Teflon Cable,Ptfe Wire, Extruded Wire & Tube,High Temperature PTFE Insulated Wire, Multi core Cables, Insulated Sleevings,Coaxial / Triaxial Cables,Ptfe Tapes, Thermocouple / Compensating Cables, Wiring Harness/ Wiring Harness Assembly, Fiberglass / Thermal Wires,Specical Cables as per Specification from India.
FIEO
Member of Federation of Indian Export Organizations Set Up
by Ministry of Commerce, Government of India

Catalog
Home | About us | Products | Contact Us | Site Map | Inquiry
Careers | R&D | Quality | Clientele | Associated Links | Certification | News Desk | Packaging
Testimonials | Privacy Policy | Disclaimer | Articles | Resource | Blog

Contact Us :1449/27, 30 Feet Road Durgapuri, Delhi -110093 (INDIA) Ph. +91-11-65299900, 65299800

Follow us on Facebook Follow us on TwitterGoogle Plus Tumbler
Bookmark and Share
Relemac Design By Relemac Team   Copyright © 2013 Relemac Technologies - Cables Manufacturers India