|
Lan Cables / Strutural Cables
Data Cables : These are cables that lead from your computer to your GPS device. These tend to use the newer USB or the older serial protocol. |
| |
| Product State |
|
Transmission Characteristics |
| Type |
CAT-5E FTP |
Impedance(zo) 1-100MHz |
100 ± 15ohms |
| Standard |
4 Pairs |
Attenuation(IL) 100MHz |
:22dB/100m |
|
Return Loss(RL) 100 MHz |
20dB/100m |
| Material Construction |
Next 100MHz |
35 dB/100m |
| Conductor |
Copper 0.50mm |
PSNEXT 100 MHz |
32.3dB/100m |
| Insulator |
Solid PE 1.00mm |
ELFEXT 100MHz |
24dB/100m |
| Tape |
Polyester Ribbon 30mm |
PSELFEXT 100MHz |
21dB/100m |
| Drain wire |
Tinplate Copper 0.50 |
Velocity of propagation 100MHz |
0.620/100m |
| Shield |
AL Foil 70mm |
Delay 100MHz |
538 ns/100m |
| Jacket |
PVC |
Speed (SKEW) 1-100MHz |
45ns/100m |
|
| Delivery Instruction |
|
Product Standard |
|
| Length |
305m/box |
ISO/IEC 11801 |
| Diameter |
6.5 ± 0.1mm |
ANSI/EIA/TIA-568-B |
| Max Strain Power |
80N |
YD/T1019-2001 |
| Temperature Range |
-40ºC ~ +60ºC |
YD/T838-1976 |
|
|
UL-444 |
| |
|
| |
| |
| Product State |
|
Transmission Characteristics |
| Type |
CAT -6E FTP |
Impedance(ZO) 1-250MHz |
100 ± 15 Ohms |
| Standard |
4Pairs |
Attenuation(IL) 250MHz |
22dB/100m |
|
Return Loss(RL) 250 MHz |
20dB/100m |
| Material Construction |
Next 250MHz |
38.3dB/100m |
| Conductor |
Copper 0.55 mm |
PSNEXT 250 MHz |
:36.3dB/100m |
| Insulation |
Solid PE 1.10mm |
ELFEXT 250MHz |
19.8dB/100m |
| Type |
Polyster Ribbon 30mm |
PSELFEXT 250MHz |
16.8dB/100m |
| Drain wire |
Tinpate Copper 0.50 |
Velocity of propagation 250MHz |
0.620/100m |
| Shield |
AL Foil 70mm |
Delay 250MHz |
538 ns/100m |
| Jacket |
PVC |
Speed(SKEW )1-250MHz |
45ns/100m |
|
| Delivery Instruction |
|
Product Standard |
|
| Length |
305m/box |
ISO/IEC 11801 |
| Diameter |
7.3 ± 0.1mm |
ANSI/EIA/TIA-568-B |
| Max Strain Power |
80N |
YD/T1019-2001 |
| Temperature Range |
-40ºC ~ +60ºC
|
YD/T838-1976 |
|
UL-444 |
| |
|
| |
| |
| Product State |
|
Transmission Characteristics |
| Type |
CAT -6E UTP |
Impedance(ZO) 1-250MHz |
100 ± 15 Ohms. |
| Standard |
4Pairs |
Attenuation(IL) 250MHz |
32.8dB/100m |
|
Return Loss(RL) 250 MHz |
17.3 dB/100m |
| Material Construction |
Next 250MHz |
38.3dB/100m |
| Conductor |
Copper 0.55 mm |
PSNEXT 250 MHz |
36.3dB/100m |
| Insulation |
Solid PE 1.00mm |
ELFEXT 250MHz |
19.8dB/100m |
| Center Cross |
PE |
PSELFEXT 250MHz |
16.8dB/100m |
| Jacket |
PVC |
Velocity of propagation 250MHz |
0.620/100m |
|
Delay 250MHz |
536 ns/100m |
| Speed(SKEW )1-250MHz |
45ns/100m |
|
| Delivery Instruction |
|
Product Standard |
|
| Length |
305m/box |
ISO/IEC 11801 |
| Diameter |
6.8 ± 0.1mm |
ANSI/EIA/TIA-568-B |
| Max Strain Power |
80N |
YD/T1019-2001 |
| Temperature Range |
-40ºC ~+60ºC |
YD/T838-1976 |
|
UL-444 |
| |
| This category 6, four pair cable is a high-speed high performance, 100 ohm impedance cable capable of carrying high bit-rate signaling for extended distances in horizontal cabling. Applications can include Voice, ISDN, ATM 155 Mbps, ATM 622 Mbps, 100 Mbps TPDDI, Fast and Giga Ethernet and IEEE 802.3/5/12, 100 BASE VG(100 BASE NE), 100 BASE -T Mbps TP-PMD, 100 Base - T and any other further applications designed for Category 6 Cables. |
| |
|
| |
| Product State |
|
|
| Type |
CAT -5E UTP |
| Standard |
4Pairs |
|
| Material Construction |
|
Transmission Characteristics |
| Conductor |
Copper 0.50 mm |
Impedance(ZO) 1-100MHz |
100±15 Ohms. |
| Insulation |
Solid PE 0.90 mm |
Attenuation(IL) 100MHz |
22dB/100m |
| Jacket |
PVC |
Return Loss(RL) 100 MHz |
20dB/100m |
|
Next 100MHz |
35 dB/100m |
| PSNEXT 100 MHz |
32.3dB/100m |
| ELFEXT 100MHz |
24dB/100m |
| PSELFEXT 100MHz |
21dB/100m |
| Velocity of propagation 100MHz |
0.620/100m |
| Delay 100MHz |
538 ns/100m |
| Speed(SKEW )1-100MHz |
45ns/100m |
|
| Delivery Instruction |
|
Product Standard |
|
| Length |
305m/box |
ISO/IEC 11801 |
| Diameter |
5.4 ± 0.1mm |
ANSI/EIA/TIA-568-B |
| Max Strain Power |
80N |
YD/T1019-2001 |
| Temperature Range |
-40ºC ~ +60ºC |
YD/T838-1976 |
|
UL-444 |
|
| This category 5E, for pair is a high-speed high performance, 100 ohm impedance cable capable of carrying high bit-rate signaling for extended distances in horizontal cabling. Applications can include Voice, ISDN, ATM 155 Mbps, ATM 622 Mbps, 100 Mbps TPDDI, Fast and Giga Ethernet, 100 BASE-T Mbps TP-PMD, 100 Base - T. |
|
|
|
|
Design By Relemac Team -